Charnwood W212/1 Pair of additional clamps for W212 and W215 Floorstands

Charnwood Pair of additional clamps
for W212 and W215 Floorstand
W212/1

Key Features

Additional pair of runners.

Can be used to mount any machine onto either of our Universal mitre saw stands W212 or W215.

With a second pair of clamps you can have two tools permanently fixed to the clamps so swapping them over on the stand takes only a few seconds. Tools can be stored with the clamps attached when not in use.

It is also possible to mount 2 tools at the same time which complement each other such as a lathe and a grinder.

Our clamps are compatible with other makes of stand. To check compatibility; 
Distance from the outside of the 2 round bars 175mm
Diameter of round bars 35mm up to 45mm

Known to be compatible with;
Erbauer Mitre Saw Stand 

      Charnwood W212/1 Clamp Parts