Charnwood W670 12" Sliding Table Panel Saw

Charnwood W670 12" Cast Iron Table Saw with Aluminium Beam Sliding Table

• A trade rated panel saw capable of handling 8 x 4 panels. The sliding beam has a heavy duty construction with a telescopic support arm under the outrigger table, to allow heavier panels to be effortlessly moved.
• The back fence is 1200mm long and is extendable to 2200mm. There is a sliding production stop with a metric measuring scale. The fence can be set at any angle between 90 and 45 degrees.
• For crosscutting solid wood there is also an auxiliary mitre fence which is adjustable 60 degrees each way and has a cam lock vertical work clamp.
• The rip fence runs on a solid steel bar and allows dimensions of up to 1225mm to be set. The is also a micro adjuster to allow the rip fence to be moved by small amounts.
• A 3hp braked induction motor supplies the power for cutting up to 100mm depth. There are 2 separate hand wheels for controlling blade height and blade tilt.
• Supplied with emergency stop button, 24 tooth TCT sawblade, sliding beam, rear extension table, right hand extension table, dust extraction outlet 100mm diameter, 2.0m power cable and fitted 16 amp plug.
• No scoring unit on this machine
• 16 amp supply required with 'C' or 'D' rated breaker

• Main Table Size: 760mm x 960mm (without right hand extension)
• Main Aluminium Sliding table Size: 1400 x 240mm 
• Main Footprint (exc sliding table length): 960mm deep  x 1200mm wide (LH sliding table to RH ext table)
• Main Footprint : 1400mm deep x 1200mm wide (length of sliding table & rear take off - sliding table to RH ext table)
• Maximum Ripping Width: 940mm (using overhang of solid steel bar on rip side)
• Assembled Dimensions (WxDxH): 2500mm x 1400mm x 1250mm
• Minimum Floor Area Required - all extensions (WxD): 2500mm x 3100mm
• Maximum Crosscutting Width: 1225mm
• Length Stop On Crosscut Fence: 1250mm
• Length Stop Using Extension: 2200mm
• Blade Tilt: 90 – 45 degrees
• Cutting Depth at 90 degrees: 100mm
• Cutting Depth at 45 degrees: 75mm
• Blade Diameter x Bore x Kerf: 315mm x 30mm x 3.2mm
• Work Table Height: 875mm
• Motor (induction) Braked: 2200w (3hp) / 240v
• No-load Blade Speed: 4250
• Minimum Blade Width (Kerf): 3.2mm
• Weight: 194Kg
• Db (Without Load/With Load): 81Db/89.5Db
• Assembly Time Required: 45 Minutes (Needs 2 People)
• Shipping Dimensions 1 (WxDxH): 1020 x 970 x 1020mm
• Shipping Dimensions 2 (WxDxH): 1440 x 1450 x 190mm
• Minimum Door Access Width: 680mm
• Rating: Trade
• Product Guarantee: 5 Years
• Minimum Door Opening Required: Width In Crate: 1030mm
• Minimum Door Opening Required: Width Out of Crate: 680mm

It is highly recommended that a dust extractor is used at all times with this saw to prevent the harmful build up of dust and chips. The hose kit supplied collects dust from the saw guard and takes it to the single 100mm diameter hose connection point at the rear of the machine.

Charnwood W670 Owners Manual

Charnwood Machinery 5 Year Guarantee