Famag 1624606 Pilot Guided Bormax 2.0 Prima, Set of 6pcs in Wooden Box INC Centre Point

Famag 1624606 Pilot Guided Bormax 2.0 Prima, Set of 6pcs in Wooden Box INC Centre Point

• 6 pcs: Ø 15, 20, 25, 30, 35, 40 mm
• In wooden case

• Bormax 2.0 prima with exchangeable centre point and pre-drill bit.
• Two in reverse order staggered, grooved main cutting edges, a circumferencial cutting edge with longitudinal grooves - both effecting that a clear less feed force is necessary. Also minimizes the friction and the growth of heat.
• The pilot-drill bit is ideal for drilling at an angle which is not 90° in workpieces surface, which occurs for example in the construction of staircase.
• Can be used with the centre point as traditional Bormax.
• Clean drilling at many angles into soft wood, European hard wood, and MDF panels. Very good alternative to the expensive drill bit for construction of stairs product line 1575.
• In combination with extension shanks product line 1639 perfectly suitable for drilling deep holes.
• Alloyed tool steel, pre-drill bit HSS-G. 1500 - 3000 rpm. e.g. Ø 20 mm 2400 rpm in soft wood.

Click here to see the full range of options for this product