Festool 491040 Groove Cutting Disc HW D40x2

The groove depth can be determined via three different cutter spindles. Variant 1 without a ball bearing must be used with a parallel side fence, variant 2 with a 16 mm ball bearing and variant 3 with a 28 mm ball bearing.

• The carbide-tipped disc groove cutter is perfectly suited to creating grooves for seals or for parquet touch-up
• Cutter replacement is done quickly and easily via a screw on the cutter spindle
• carbide-tipped cutters
• various routing depths can be realised by different cutter spindles

• Make grooves on the front using cutter discs with a cutter width of 1.5 mm to 5 mm
• The milling discs can be combined with the cutter spindle without ball bearing or with a ball bearing Ø of 16 or 28 mm

• Diameter 1: 40mm
• Diameter 2: 6mm
• Effective length (NL): 2mm