Kreg PRS5000 Kreg Precision Router Table Lift

Kreg Precision Router Table Lift - (Ref: PRS5000)

• PLEASE NOTE - MOTOR SHOWN IS FOR ILLUSTRATION ONLY

• Allows precise above-the-table setup changes for table-mounted routers
• Above-table collet access allows fast, easy, above-table bit changes
• 3/8” x 91/4” x 113/4” (9.5mm x 235mm x 298mm) hard-anodized aluminum plate won’t sag, resists scratches
• Fits all Kreg router tables and many competitive brands
• Bearing-guided carriage provides smooth operation
• Precision indexing ring with micro-adjust scale simplifies bit height changes
• Precise adjustment without backlash ensures accuracy
• PLEASE NOTE - MOTOR SHOWN IS FOR ILLUSTRATION ONLY
• ROUTER LIFT ONLY SUPPLIED - REQUIRES CUSTOMERS OWN ROUTER MOTOR
• SEE INSTRUCTIONS LINK BELOW FOR MORE INFORMATION 

• Take control of your table-mounted router for quick, accurate, reliable, and repeatable setups
• The Precision Router Lift helps you elevate your routing capabilities. It does this by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 3/8” x 91/4” x 113/4” plate fits all Kreg router tables plus many popular brands) and accepts popular router models—without the need for adapters or modifications—in a high-performance carriage that you raise and lower from above the table.
• With the Precision Router Lift there’s no more reaching under the table to make adjustments or change bits. Plus vastly improved control over all adjustments, large or small. By using the lift’s included crank you can adjust the height of your router bit easily from above the table. This makes adjustment fast, simple, and accurate. So you can set up your router faster, and dial in the exact bit height you require using the Precision Router Lift’s built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table.
• Every full revolution of the adjusting crank moves the carriage and your bit exactly 1⁄16″. Though adjustments down to thousandths of an inch are possible. To establish your baseline bit setup a built-in micro-adjust scale can be zeroed out at any point. So you can make exact bit height changes and readjust to the exact same setting confidently every time for repeat cuts.
• The Precision Router Lift is the perfect routing accessory. Whether you’re upgrading an existing router table, setting up a new one or building your own custom table. It offers the precision you demand to achieve exacting routing standards. Along with the fast, easy performance you want in order to spend less time setting up and more time routing.

Kreg PRS5000 Router Table Lift Instructions