Mafell A18 MBL Cordless Drill Driver 18v + 2 x Batteries and Charger in T-MAX

Mafell A18 MBL Cordless Drill Driver 18v + 2 x Batteries and Charger in T-MAX

ref: 91C821

To overcome the toughest challenges, we have given the new-generation Mafell A 18 cordless drill driver an especially rugged specification and extra power. By applying the Mafell ErgoBalance design principle, we have also prioritized ease of use and fatigue-free operation.

• The 18 V drill drivers offer supreme power. For extreme applications, they can deliver three times the regular torque in combination with the torque setting adapter A-DMV x3.
• Bits and push-fit accessories are inserted directly in the 1/4” drive. The bit holder, chuck and angle head can be interchanged in a matter of seconds.
• Thanks to the 43 mm clamping collar, the cordless drill drivers are compatible with all MAFELL BST drilling stations.
• The electronic anti-kickback function provides extra safety by actively shutting down the motor and protecting the wrist against sudden twisting.
• With more power than before, the 18 V machines make light work of drilling even 68 mm holes in wood.
• In difficult situations the impulse mode delivers a critical boost, e.g. for releasing immovable screws or controlling the first few turns when drilling into smooth surfaces.
• With magnetic bit holders on both sides of the battery holder, the desired bit is always to hand. Thanks to the deep sockets, accidental losses are practically ruled out.
• Focusing on the user, the A 18 and ASB 18 offer more control, better balance and enhanced safety.

• 1 cordless drill driver A 18
• 1 quick-release chuck A SBF 13
• 1 quick-release bit holder A-SBH
• 1 belt clip
• 1 auxiliary handle
• 1 battery PowerTank 18 M 72 LiHD
• 1 battery PowerTank 18 M 99 LiHD
• 1 battery PowerStation APS M
• in T-MAX

• DESCRIPTION: A 18
• CLAMPING COLLAR DIAMETER: 43 mm
• CHUCK OPENING: 13 mm
• MAX. DRILLING DIAMETER IN WOOD/STEEL: 68/13 mm
• TORQUE [SOFT/HARD]: 65/130 Nm
• IMPULSE TORQUE [SOFT]: 65 Nm
• NOMINAL SPEED-NO LOAD 1ST SETTING: 0 – 560 rpm
• NOMINAL SPEED-NO LOAD 2ND SETTING: 0 – 1.960 rpm
• WEIGHT [INCL. BATTERY]: 1,8 kg (incl. PowerTank 18 M 72 LiHD)
• DIMENSIONS (H X L X W): 201 x 145 x 79 mm
• VOLTAGE RATING: 18 V
• TORQUE SETTINGS: 10 + 1
• VIBRATION MEASURED IN METAL/REINFORCED CONCRETE: < 2,5 m/s / –
• NOISE LEVEL: 72 dB(A)
• SOUND POWER LEVEL (LWA): 88 dB(A)

Mafell A18 MBL Cordless Drill Driver Manual