Microjig FITFINDER 1/2 Gauge - Automatic Centre Finder

Microjig FITFINDER 1/2 Gauge

The FITFINDER 1/2 Gauge allows you to find the 1/2 thickness of any material up to 3" thick. Create perfectly fitting joints with zero guesswork, set fences and transfer cutting depths instantly—all with no maths or measuring.

• With the FITFINDER, finding the centre point of your work material is automatic. Set your material under the thickness gauge, and the sliding depth gauge automatically slides down to the exact 1/2-way mark of your work material in just seconds! No more guesswork, no more measurements, no more wasted time. With pinpoint precision, you can easily set the height of your table saw blade or router bit for a precise 1/2-way cut into your material.
• No maths or measuring required. The FITFINDER 1/2 Gauge automatically finds the centre of your workpiece using simple geometry. Lock the measurement in place and set the cutting depth of your saw blade/router bit, or set fences. 1 - Match the material's thickness - Place material under P2, then lower P2 so that it rests on top of the material. 2 - Find the 1/2 point - The bottom of P3 automatically adjusts to exactly 1/2 the thickness of the material. 3 - Transfer measurement - Lock in the measurement and use the FITFINDER to set cutting depths and fences.
• Set fences for resawing. Set fence position and resaw material on the bandsaw with zero guesswork.
• Centre router bits. Quickly and accurately find the halfway point of material.
• Set precise cutting depths. Lock in the measurement and transfer to the router or table saw to set cutting depth for flawless lap joints.
• Centre stock on the lathe. Find the centre of stock and mount material on the lathe for safer spindle turning.