Microjig MJ SPLITTER Steel Pro - Full Kerf 1/8 Inch

Microjig MJ SPLITTER Steel Pro - Full Kerf 1/8"

ref: SP-2

The MJ SPLITTER Steel Pro easily installs on your table saw’s zero clearance insert, replacing the riving knife. It keeps your workpiece tight to the fence to prevent burning, and keep the kerf from pinching the blade, virtually eliminating kickback.

• Package includes (4) SPLITTERS, a drill guide, and a 3/16” drill bit.
• SPLITTERS are reversible for offsets of 0.000”, 0.003”, 0.006”, and 0.009”
• Kerf range:  0.118” - 0.145"
• For 90 degree thru-cuts only.
• The included precision drill guide aligns your drill with the dead center of your kerf by registering off of the kerf itself.
• SPLITTERS are used in tandem to fill entire kerf.
• The included Kerf Keepers are used when cutting hardwoods with potentially dangerous internal stress. If the stock closes around the Kerf Keepers, they automatically eject and remain within the kerf, preventing the stock from pinching on the blade.
• To account for runout, the package includes 4 SPLITTERS with built-in offsets from the center of the kerf.  Each side has an offset in increments of .003” to ensure a perfect fit.

• (4) 1/8" Splitters
• (4) Kerf Keepers
• Drill Guide
• 7/64" Drill Bit
• Screws

Microjig MJ SPLITTER Steel Pro Instruction Manual