Nova PJSN Powergrip Chuck Jaw Set for Woodturning Scroll Chuck - ref 101197

NOVA PJSN - Powergrip Chuck Jaw Set
Woodturning Scroll Chuck Jaws
Ref: PJSN

JAWS ONLY chuck shown for illustration

• Deep internal PowerGrip for rock solid grip on a spigot
• Ideal jaws for turning larger hollow forms
• Internal and external dovetail
• Suitable for the SuperNOVA2, not recommended for use with the NOVA G3
• Expands into a recess between 95mm and 116mm diameter
• Spigot range from 77mm to 98mm diameter
• Square timber between 55mm and 76mm

The NOVA PJSN chuck jaws are the most powerful jaw available for large spigot/hollow form turning on the SuperNOVA2. (This jaw is suitable for the SuperNOVA2 chuck, but not recommended for use with the NOVA G3). There is tremendous holding power both externally and internally. The jaws are ideal for turning green wood.The top of the jaw offers a dovetail grip both internally and externally for bowl or platter work. It is in the depth combined with NOVA’s PowerGrip internal design where this jaw comes into its own. The jaws offer a rock solid grip on spigots when turning large hollow forms or even green timber, which is initially out of balance.Fitted to the SuperNOVA2, the jaw expands into a recess between 95mm and 116mm diameter. When gripping a spigot the range is 77mm to 98mm diameter. These jaws will also hold square stock between 55mm and 76mm.

Suits SuperNova2 ONLY not suitable for Nova G3 Chucks

If you are unsure if these jaws fit your chuck please contact us and we will be happy to help

THESE WILL NOT FIT ANY OF THE AXMINSTER RANGE OF CHUCKS

• Expands Internal: 95  to 116 mm
• Expands External: 77 to 98 mm
• Square Section: 55 to 76 mm
• Jaw Type: PJSN
• WARRANTY: 10 Year Full Replacement from Manufacture Defects