PROXXON 27106 Engraving Device GE 20

Proxxon Engraving Device GE 20
 

• TheProxxon GE20 is a small engraving pantograph, suitable for nameplates, jewellery and other valuable objects.
• It can also be used with self-made stencils or commercially made templates (e.g. plants, animals or coats of arms).
• A maximum of 14 characters can be fastened in the guide bar or template holder.
• Template contours can be precisely followed by using the ball handled guide marker.
• During transfer, the lettering to be milled is scaled down to either a ratio of 2:1, 3:1, 4:1 or 5:1 by simply adjusting two screws.
• The workpiece is aligned and fixed on the movable guide block by means of clamping jaws (not supplied) or a vice.

• Two sets of letters from A to Z, hyphen, full stop and dash (a total of 52 pieces)
• three Allen keys: 1.5, 3.0 and 5.0mm as well as a 2.5mm HEX (ball head) screwdriver.
• A detailed instruction manual is also included.
   

• Used for engraving nameplates, jewellery and other objects
• Four reduction ratios
• Maximum of 14 characters
• Template letters and tools included
• Detailed instruction manual supplied