🗸 Competitive Pricing 🗸 Quality Service 🗸 Extensive Stock 🗸 Experienced Staff
01726 828 388
PROXXON 717739 FD150/E LATHE + TOOLING + SPLASH GUARD
Product Code: BRI/717739
Brand: Proxxon
Please Call for Information
£607.56 Inc. VAT
£506.30 Exc. VAT
Proxxon FD150E Lathe, Splash Guard & 6 Pce Cutting Set - PACKAGE DEAL
This package comprises theProxxon FD 150/E Lathe,Proxxon Splash Guard For FD 150/E and theProxxon 6 Piece Cutting Tool Set. Proxxon FD 150/E Lathe A compact metal working lathe for facing and longitudinal turning, boring, taper turning, parting and drilling. The high maximum speed (5000rpm) allows very small diameters to be machined. The lathe has an accurate bed made from cast aluminium and the spindle from diecast aluminium. It is run using a powerful, quiet running DC motor which has a two stage belt drive used in conjunction with an electronic speed control to achieve the full speed range (500-5000rpm). The main spindle runs with precision bearings and has a continuous bore of 8.5mm. A three jaw self-centring chuck is supplied with an inside jaw range of 1.5-32mm and 12-65mm outside. The tailstock comes with a live centre and has an MK0/short bore. There is a quick change tool post with the machine accepting 6mm tooling. Proxxon Splash Guard For FD 150/E TheProxxon splashguard and chip-collecting tray is designed to fit the precision lathe FD 150/E. It is made from powder coated, 1.5mm thick sheet steel with a bevelled edge at the front and rear to enable it to be easily cleaned. The stand has pre-drilled mounting holes as well as a raised base to ensure that the lathe is secure and stable. Proxxon 6 Piece Cutting Tool Set A 6 piece cutting tool set made of high quality cobalt HSS steel. One each of boring, roughing out, parting, finishing, right and left cutter. Size 6 x 6 x 60mm. Supplied in a wodden box.
Proxxon FD 150/E LatheAccurate bed made from cast aluminium
Spindle made from diecast aluminium
Speed range of 500-5000rpm
Headstock suitable to take ER11 collets
Tailstock has a MK0/short bore
Quick change tool post for 6mm tooling
Proxxon Splash Guard For FD 150/E
To fit precision lathe FD 150/E
Powder coated, sheet steel construction
Pre-drilled mounting holes
Easy to clean
Proxxon 6 Piece Cutting Tool Set
Made of high quality cobalt HSS steel
For use with the FD 150/EProxxon Lathe
One each of boring, roughing out, parting, finishing, right and left cutter
Supplied in wooden box
This package comprises theProxxon FD 150/E Lathe,Proxxon Splash Guard For FD 150/E and theProxxon 6 Piece Cutting Tool Set. Proxxon FD 150/E Lathe A compact metal working lathe for facing and longitudinal turning, boring, taper turning, parting and drilling. The high maximum speed (5000rpm) allows very small diameters to be machined. The lathe has an accurate bed made from cast aluminium and the spindle from diecast aluminium. It is run using a powerful, quiet running DC motor which has a two stage belt drive used in conjunction with an electronic speed control to achieve the full speed range (500-5000rpm). The main spindle runs with precision bearings and has a continuous bore of 8.5mm. A three jaw self-centring chuck is supplied with an inside jaw range of 1.5-32mm and 12-65mm outside. The tailstock comes with a live centre and has an MK0/short bore. There is a quick change tool post with the machine accepting 6mm tooling. Proxxon Splash Guard For FD 150/E TheProxxon splashguard and chip-collecting tray is designed to fit the precision lathe FD 150/E. It is made from powder coated, 1.5mm thick sheet steel with a bevelled edge at the front and rear to enable it to be easily cleaned. The stand has pre-drilled mounting holes as well as a raised base to ensure that the lathe is secure and stable. Proxxon 6 Piece Cutting Tool Set A 6 piece cutting tool set made of high quality cobalt HSS steel. One each of boring, roughing out, parting, finishing, right and left cutter. Size 6 x 6 x 60mm. Supplied in a wodden box.
Proxxon FD 150/E Lathe
View similar items
