Robert Sorby 3/4" Spindlemaster 812 - Unhandled Sovereign Compatible

Robert Sorby 3/4" Spindlemaster 812 - Unhandled Sovereign Compatible

• The Spindlemaster is especially effective on the crudest and softest woods like pine. Its enhanced tip, shear cutting and highly polished bevel combine to produce a very fine finish on all types of wood - finer than 400 grit paper. And it just sails through knots and other imperfections as if they were not there. Sharpening is straightforward. It is an important addition to the spindle turners armoury. It can be used to plane, bead, cove and trim end grain. Easy to use and sharpen. The polished back bevel helps to produce a high quality finish
• Simply hone across the flat top face to keep it in tip-top condition. As a result of its contact with the workpiece the bevel is effectively self polishing and should need no further attention. The Spindlemaster comes complete with its own set of illustrated instructions.
• Many turners prefer to turn their tool handles to their own specifications. For those turners we offer the un-handled version of Sorby's standard Spindle Gouge blade. These High Speed Steel (HSS) un-handled blades are identical to the ones found on the handled versions.
• The blades listed here will also fit the Sorby Sovereign System Handles. A Collet Adapter may be required if used with the Sovereign System. Check your manual for the size collet required if, any.
• A micro version  is also available - ideal for pen turning or decorating spindles, Christmas ornaments or miniatures.

The product you are currently viewing is highlighted in red.