Robert Sorby Ball End Cutter HSS - 804C01

Robert Sorby Ball End Cutter HSS - 804C01

• The Robert Sorby Ball End Cutter 804C01 is designed for the smooth shaping on the inside of bowls, vases and hollow forms. It delivers the same smooth surfaces and is designed for the same purposes as the RS233C Ball End cutter but supports a different tool range. The two are not interchangeable.
• This cutter is one of 14 that support a range of tools and offer incredible flexibility to the turner.
• Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
• High Speed Steel (HSS): This super fine grain structure will provide a razor sharp edge. the result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as bench grinders or on the Robert Sorby ProEdge. (Made much easier with the aid of the tip holder, RSTM-TH). Sharpens to 0.2 – 0.4 microns. Hardness : 62 RC. Material: M2 HSS
• Please note, cutters can be sharpened using the Robert Sorby 472 tip holder.

• Box Hollower (803H)
• Mushroom Tool (804H)
• Captive Ring Tool (805H)

The product you are currently viewing is highlighted in red.

Click here to see the full range of options for this product