Robert Sorby Half Radius Cutter HSS - 804C10

Robert Sorby Half Radius Cutter HSS - 804C10

• The Robert Sorby Half Radius Cutter is excellent for scraping the inside curve of any small project.
• The Half Radius Cutter is one of 14 specialised tips that support a range of tools and offer incredible flexibility to the turner.
• Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
• High Speed Steel (HSS): This super fine grain structure will provide a razor sharp edge. the result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as bench grinders or on the Robert Sorby ProEdge. (Made much easier with the aid of the tip holder, RSTM-TH). Sharpens to 0.2 – 0.4 microns. Hardness : 62 RC. Material: M2 HSS
• Please note, cutters can be sharpened using the Robert Sorby 472 tip holder.

• Box Hollower (803H)
• Mushroom Tool (804H)
• Captive Ring Tool (805H)

The product you are currently viewing is highlighted in red.

Click here to see the full range of options for this product