Robert Sorby Round End Swivel Tip Cutter HSS - RS211C

Robert Sorby Round End Swivel Tip Cutter HSS - RS211C

• The Robert Sorby Round End Swivel Tip is an excellent choice for removing waste material very quickly – especially undercutting. A true work horse designed for the multi-tip hollowing tool but suitable for a range of Robert Sorby tools (see below).
• High Speed Steel (HSS): This super fine grain structure will provide a razor sharp edge. the result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as bench grinders or on the Robert Sorby ProEdge. (Made much easier with the aid of the tip holder, RSTM-TH). Sharpens to 0.2 – 0.4 microns. Hardness : 62 RC. Material: M2 HSS
• This cutter is also available in Robert Sorby’s Excelsior (titanium nitride coated high speed steel) series.
• Sharpening: Use a diamond file or honing stone flat across the face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
• Please note, cutters can be sharpened using the Robert Sorby 472 tip holder.

• Multi-tip Hollowing Tool (RS200KT and RS200)
• RS 2000 Deep Hollowing System
• Swivel Tip Probe (8803H)
• Hollowmaster (RS230KT, SOV-RS230, SOV-RS340)

The item you are currently viewing is highlighted in red below.

Click here to see the full range of options for this product