Robert Sorby Square / Pointed Chattertool Cutter HSS - RS220

Robert Sorby Square / Pointed Chattertool Cutter HSS - RS220

• One of two double ended chattertool cutters that will produce a myriad of decorative patterns. Alternative patterns can be created by adjusting cutter lengths, alternating between cutter shapes, changing lathe speeds, using traverse or stationary cuts and by making cuts on, above or below centre. To be produced on end grain only
• Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often.
• High Speed Steel (HSS): This super fine grain structure will provide a razor sharp edge. the result is a superior finish to your turning projects and less need for sanding. Can easily be sharpened on traditional sharpening machines such as bench grinders or on the Robert Sorby ProEdge. (Made much easier with the aid of the tip holder, RSTM-TH). Sharpens to 0.2 – 0.4 microns. Hardness : 62 RC. Material: M2 HSS

• RS2000 Deep Hollowing System
• Chattertool (RS215KT, RS216)