SP005 - Sandi Pad 50mm Diameter Soft High Profile Pad

Sandi Pad 50mm Diameter Soft High Profile Pad - (Ref: SP005)

• The sanding pads have a shank which can be mounted into any suitable drill chuck. They can be used in a drill press or in a hand held drill to powersand curved surfaces.
• Woodturners can mount the pad into a drill chuck fitted to the headstock of a lathe.
• The foam pad conforms to the curve and the contra rotations of the drill or lathe mounted pad, eliminate swirl marks to produce a fine finish.
• Pad Diameter: 50mm (2")
• Pad Firmness: Soft
• Shank Diameter: 6mm (1/4") 
• The pads have a hook backing and can be used with any loop backed discs. The hook & loop system allows discs to be quickly swapped to work down through grit sizes to achieve a superb finish.
• There are 3 types of pad available with varying degrees of firmness: 
• Hard Urethane pads are dense with only a slight give, best suited to flatter surfaces.
• EVA Foam is medium firmness, a good combination between durability and flexibility.
• The Soft High Profile Pad is the most flexible and allows the material to mould to tight contours which can give better access in certain applications.