TREND KWJ750P - Pro Multi-material worktop jig for up to 750mm worktop

Trend Pro Multi-material worktop jig for up to 750mm worktop - (Ref: KWJ750P)

• Pro Multi-material jig for worktop joints 150mm - 750mm
• FRONT EDGE SETTING All settings are done from the front edge eliminating any discrepancies from scribing or when using non-standard width worktops
• EASY SET REFERENCE WINDOW Fast set up for any backset, simply align to a measured line
• 5 BACKSET OPTIONS (3, 5, 10, 24, 35mm) to meet the demands of new materials, edge profiles and trends
• FLUSH EDGE COMPATABILITY Allows worktops to be cut flush with door faces for handleless contemporary styles without additional measuring or marking up
• SINGLE PASS JOINT CUTTING ON NARROWER BACKSETS WITH THINNER WORKTOPS Minimises strain on the router and extends cutter life
• FAST JOINTING Cuts a full male and female joint in 15 minutes including setting up
• MULTIPLE WORKTOP MATERIAL COMPATABILITY Compact laminate, Composite, Solid Wood, Chipboard Laminate
• NO SET WORKTOP WIDTH RESTRICTION No need for alignment pins for worktop widths
• FRUSTRATION FREE SETUP Simple intuitive setup; measure, mark, clamp and cut
• OFFSET CAMS Unique backset wedges for consistent easy setting
• EDGE PROFILE COMPATABILITY Covers square edge, small radius, Postform radius and bullnose profiles
• CLAMP RECESSES For below the surface clamping for unrestricted routing with plunge saw clamps

• 4 x ABS Plastic pins
• 4 x Cams (pairs)

• Length: 985 mm
• Width: 335 mm
• Thickness: 12 mm
• Weight: 4.73 kg
• End Cut: 45 degrees
• Corner Radius: 40 mm
• Corner Radius: 100 mm
• Corner Radius: 400 mm
• Corner Mitre Joint: 45 degrees
• Female cut material width loss (inset): variable
• Bolt recesses: 3
• Bolt recess centres: 175 + 175 mm
• Bolt recess width: 14 mm
• Guide bush: 30 mm
• Plunge router: 1/2-inch (min. 1300 watts)
• Cutter: 12.7 mm x 50 mm cut
• Clamps: Two