TREND T5EB 1/4" Plunge Router 240V +18mm Routabout Jig +Rings +3yr Warranty

Trend Variable Speed 1/4" Plunge Router T5EB 240v with Trend 18mm Routabout Jig RBT/1 and Trend 10 Routabout Rings RBTRNG18/10 - 3 Year Warranty - T5EB/KIT/G

T5 Mark 1

Electronic full wave variable control of spindle speed under load for a fine finish on all types of material

• Soft-start feature eliminates sudden movement of machine on start up.
• Spindle lock & hex collet nut allows easy cutter changes.
• Precision machined one piece multi-slit collet with combined nut.
• Compact design & low weight make it easy to use especially for intricate work.
• Adjustable twin rod side-fence for guiding along a straight edge.
• New features include: increased power, soft grip handles, low profile dust spout
  and ergonomic spindle lock.
• Three year extended warranty with online registration (UK and Eire only)

• Rating: Professional / Trade
• Plunge stroke: 0-50 mm
• Power input: 1000 watt
• Power ampage: 4.6 amp
• Standard collet dia: 1/4"
• No load speeds: 9-27000 rpm
• Dust spout size ID: 35 mm
• Guide bush dia: supplied 20 mm
• Rod diameter: 80 mm
• Rod length: 300mm
• Rod centres: 84 mm
• Cutter dia. max: 40 mm
• Other collet dia: none only 1/4"
• Weight; 3.3kg
• Voltage: 240 volt
• Sound pressure Lpa: 81.0 dB(A)1
• Acoustic pressure Lwa: 94.01 dB(A)2
• Hand arm vibration: <2.5 m/s2

• 1 x 1/4" Collet
• 1 X 20mm Guide Bush
• 1 X 35mm Clip-in Dust Spout
• 1 X Side-fence with Micro Adjuster
• 1 X Beam Trammel Attachment

Trend T5 Mk1 / Mk2 Owners Manual

Trend 18mm Routabout Jig RBT/1
and Trend 10 Routabout Rings RBTRNG18/10

• Access to pipes & cables beneath chipboard floors in seconds. For 18mm thick floors.
• For builders, plumbers & electricians.
• A 250mm diameter opening can be cut and made good in seconds.
• Designed for use in new or existing 18mm chipboard or similar floors.
• Cuts only the thickness of the board.
• No waste, the piece cut out is used to make good the floor.
• All you need is a plunge router (750 watts or above).
• A Unibase may be required for certain makes and models of router.

• Shank diameter 1/4 inch
• Floor thickness 18 mm
• Access hole diameter 250 mm
• Max. load capacity 200 kg
• Please refer to UK Building Regulation Approved Document B and any amendments before using this accessory.

Routabout Jig is supplied with:

• 1 x Routabout template
• 3 x Spacer rings
• 1 x Special TCT router cutter
• 1 x 30mm Plastic guide bush

Optional Accessories

Replacement Parts

Take a look at our Knowledge Centre for beginners guides and helpful advice on everything you need to know about routing.