TREND T5EB 1/4" Plunge Router 240V +2pc Hinge Jig A + Cutter + 3yr Warranty

Trend Variable Speed 1/4" Plunge Router T5EB 240v with Trend Hinge Jig A H/JIG/A and Trend 12mm Router Cutter TR12x1/4TC - 3 Year Warranty - T5EB/KIT/I

T5 Mark 1

Electronic full wave variable control of spindle speed under load for a fine finish on all types of material

• Soft-start feature eliminates sudden movement of machine on start up.
• Spindle lock & hex collet nut allows easy cutter changes.
• Precision machined one piece multi-slit collet with combined nut.
• Compact design & low weight make it easy to use especially for intricate work.
• Adjustable twin rod side-fence for guiding along a straight edge.
• New features include: increased power, soft grip handles, low profile dust spout
  and ergonomic spindle lock.
• Three year extended warranty with online registration (UK and Eire only)

• Rating: Professional / Trade
• Plunge stroke: 0-50 mm
• Power input: 1000 watt
• Power ampage: 4.6 amp
• Standard collet dia: 1/4"
• No load speeds: 9-27000 rpm
• Dust spout size ID: 35 mm
• Guide bush dia: supplied 20 mm
• Rod diameter: 80 mm
• Rod length: 300mm
• Rod centres: 84 mm
• Cutter dia. max: 40 mm
• Other collet dia: none only 1/4"
• Weight; 3.3kg
• Voltage: 240 volt
• Sound pressure Lpa: 81.0 dB(A)1
• Acoustic pressure Lwa: 94.01 dB(A)2
• Hand arm vibration: <2.5 m/s2

• 1 x 1/4" Collet
• 1 X 20mm Guide Bush
• 1 X 35mm Clip-in Dust Spout
• 1 X Side-fence with Micro Adjuster
• 1 X Beam Trammel Attachment

Trend T5 Mk1 / Mk2 Owners Manual

Trend Contractor Hinge Jig - H/JIG/A - 2 piece jig

The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors and frames using a plunge router.

• It is easy to use with minimal setting-up time, completing the job both accurately & quickly.
• Used on-site & in joinery shops to increase productivity with excellent results.
• Four apertures for fire door requirements.
• No need for marking out in the conventional way.
• Quick & simple to set-up as the hinge is used as the pattern.
• Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges.
• Use with a light duty plunge router with 1/4 inch collet.
• Long reach router cutter required, 12mm diameter with 70mm overall length.
• Angled position slots to prevent creep.
• Unibase may be needed.
• Patent No. GB2285410.
• T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160.

• Length min. 2-5/8" (67mm)
• Length max. 5" (127 mm)
• Width min. 3/8" (9.5 mm)
• Width max. 1-3/8" (35 mm)
• Width max. in 35mm rebate 20 mm
• Width max. in 44mm rebate 30 mm

• Height min. 6' 5" (1956 mm)
• Height max. 6' 10" (2100 mm)*
• Thickness min. 5/8" (16 mm)
• Weight 3.3 kg
• Jig overall length 1957 mm
• * Please note for doors over 2040mm the botton hinge will be higher than 9" up.

Trend Hinge Jig / Hinge Recessing Jig is supplied with:

• 4 x Apertures
• 4 X Bradawls with spacer
• 1 X 16mm guide bush
• 1 X T-handle hex key
• 1 X 4mm spacing gauge
• 1 X Carry case

Trend H/JIG/A Manual

Replacement Parts

Take a look at our Knowledge Centre for beginners guides and helpful advice on everything you need to know about routing.