Tormek SVP-80 Wetstone Grinder Profile Knife Jig - ref 701403

Tormek SVP-80 Profile Knife Jig
Ref: 701403

The jig can be used to sharpen all makes and shapes of moulding knives with 24/30/38mm between centres up to a maximum width of 100mm.

• Sharpens all shapes of moulding knives
• Sharpens all moulding knives with 24/30/38mm between centre holes
• Face is precision ground
• Knife held in position with magnet & guiding pins
• Up to maximum width of 100mm
• Not suitable for knives without holes
• Tormek T-7 and T-8 Sharpening Systems are recommended for this jig

• Sharpens profiled spindle moulder knives.
• The knife is held securely in position with a magnet and guide pins which match the safety pin holes in the knife.
• Since the sharpening is done on the flat backside of the moulding knife, this jig can handle all kinds of profiles with a maximum width of 100 mm (3 7/8"). The frame includes two sliding strips that reduce friction and facilitate sharpening. You maintain good contact with the blade and you can feel when it touches the grinding wheel. The SVP-80 Moulding Knife Attachment also allows you to sharpen profiled paint scrapers to maximum sharpness.

SVP-80 Moulding Knife Attachment Instructions      

SVP-80 Parts List