✔ Competitive Pricing ✔ Quality Service ✔ Extensive Stock ✔ Experienced Staff
F or F inding e X cellent Tools ..... look no further than Westcountry Machinery 4 Wood
Trend T10EK - 2000W 1/2" Router with Hinge Jig, Straight Cutter and Corner Chisel
Product Code: T10EK-PK6
Brand: Trend
Was £769.22 Inc. VAT
Now £559.99!
£466.66 Exc. VAT
Trend T10EK - 2000W 1/2" Router with Hinge Jig, Straight Cutter and Corner Chisel
Package includes:
1 x Trend T10EK - 2000W 1/2" Variable Speed Workshop Plunge Router 240v with Kitbox
1 x TREND H/JIG/A HINGE JIG TWO PART IN CASE
1 x TREND TR12x1/4TC Hinge Jig Router Cutter Two Flute 12.0mm dia x 19.0mm Cut - Ex LONG 70.0MM O/L
1 x TREND CORNER CHISEL C/CHISEL for Hinge Jig
Trend T10EK - 2000W 1/2" Variable Speed Workshop Plunge Router 240v with Kitbox
Heavy Duty Trade Router Designed for Tradespeople in the Workshop or On-Site. The Essential Router for Worktop Fitting, Lock and Stair Jigs and General Workshop use.
Key Features
Powerful 2000 Watt Motor for heavy duty work
Electronic variable speed control with soft start for a better finish
Micro adjustable side fence : Improves accuracy with micro adjustments for straight edge work
80mm plunge depth: Ideal for worktop fitting and lock body mortising
Electronic full wave variable control of spindle speed under load for a fine finish on all types of material.
Soft start eliminates sudden movement of machine on start up.
Two column precision base with large phosphor bronze bushes for plunging accuracy.
Spindle lock and hex collet nut results in easy cutter changes with the 22mm spanner supplied.
Adjustable twin rod parallel side-fence guide with integral micro-adjuster for straight edge work.
Precision machined one-piece multi-slit collet for fail-safe grip of cutter shank.
3-position revolving depth stop for fast adjustable settings.
Adjustable inner plate for guide bush accuracy.
Large base aperture for large cutters with quick release dust spout.
Three year extended warranty with online registration (UK and Eire only).
Items included
1 x 1/2" Collet - CLT/T10/127
1 X Inner Plate - WP-T9/075
1 x 30mm Guide Bush
1 X Line up Pin - WP-T9/090
1 X 35mm Clip-in Dust Spout - WP-T11/107
1 X Side-fence with Micro Adjuster - WP-T10/087
1 X Storage Case - CASE/T10
Specification
Rating: Professional/Trade
Voltage: 230 volt
Plunge stroke: 0-80 mm
Power input: 2000 watt
Power ampage: 9.6 amp
Standard collet dia: 1/2 inch
No load speeds: 8-20000rpm
Dust spout size ID: 35 mm
Guide bush dia. supplied: 30 mm
Cutter dia. max: 50 mm
Trend T10 / T11 Router Owners Manual
Trend Hinge Jig A - Hinge Jig Two Part In Case - (Ref: H/JIG/A)
The two part Contractor Hinge Jig is a portable template set designed for recessing hinges in wooden doors & frames using a plunge router
Key Features
It is easy to use with minimal setting-up time, completing the job both accurately & quickly
Used on-site & in joinery shops to increase productivity with excellent results
Four apertures for fire door requirements
No need for marking out in the conventional way
Quick & simple to set-up as the hinge is used as the pattern
Clean & accurate recesses are achieved every time. Suitable for timber based doors & square butt hinges
Can be used on both inside and outside doors, rebated frames and on maximum 25mm thick fixed stops
Use with a light duty plunge router with 1/4 inch collet
Long reach router cutter required, 12mm diameter with 70mm overall length
Angled position slots to prevent creep
Unibase may be needed
T4EK router requires a ref. UNIBASE or special guide bush ref. GB/T4/160
Items included
4 x Apertures
2 x Bradawls with spacer
1 x 16mm guide bush
1 x T-Handle hex key 4mm
1 x 4mm spacing gauge
1 x Carry case
Specification
Length min: 2 5/8" (67 mm)
Length max: 5" (127 mm)
Width min: 3/8" (9.5 mm)
Width max: 1 3/8" (35 mm)
Width max. in 35mm rebate: 20 mm
Width max. in 44mm rebate: 30 mm
Door sizes possible
Height min: 6' 5" (1955 mm)
Height max: 2100 mm*
Thickness min: 5/8" (16 mm)
Weight 3.3 kg
Jig overall length 1957 mm
Plate thickness 2 mm
Fixed stop max. thickness 25 mm**
* Please note for doors over 2040mm the bottom hinge will be higher than 9" up.
** Max. hinge leaf width 20mm (35mm doors)
TR12X1/4TC - Two Flute Straight Cutter
12mm Dia x 19mm Cut x 1/4" Shank
For use with the Trend Hinge Jig and Lock Jig
Key Features
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods
For housing, grooving and mortising
Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life
PTFE coated, indicated by distinctive black colouring
Can be used on hardwood & softwood, fibreboard, plywood and particle board
Etched dimensions on extra long 40mm shanks
Specification
D: 15/32 inch (imperial diameter)
D: 12 mm (metric diameter)
C: 3/4 inch (imperial cut length)
C: 19 mm (metric cut length)
OL: 70 mm (overall length)
Shank Diameter: 1/4 inch
Trend Corner Chisel - To quickly square up rounded corners when using lock and hinge jigs - (Ref: C/CHISEL)
Key Features
Allows a rounded recess in wood to be cut to a square recess with the use of a hammer
Ideal for squaring hinge recesses in door frames and door edges, as well as lock faceplates
Spring loaded high speed steel (HSS) anvil for a sharp cut and long life
Light weight aluminium body design
Can be used with the Trend Hinge Jig
Can be resharpened
Specification
Length: 70 mm
Width: 29 mm
Weight: 100 g
Take a look at our Knowledge Centre for beginners guides and helpful advice on everything you need to know about routing.
Product Videos
VIDEO
VIDEO
VIDEO
VIDEO
Items Included
1 X TREND CORNER CHISEL C/CHISEL for Hinge Jig
1 X TREND TR12x1/4TC Hinge Jig Router Cutter Two Flute 12.0mm dia x 19.0mm Cut - Ex LONG 70.0MM O/L
1 X Trend T10EK - 2000W 1/2" Variable Speed Workshop Plunge Router 240v with Kitbox
1 X TREND H/JIG/A HINGE JIG TWO PART IN CASE