Veritas Detail Flush Cutting Saw Single Edge 26TPI - 05K3410

Veritas Detail Flush-Cutting Saw - Single Edge 26tpi - (Ref: 504598 / 05K3410)

• Excellent for cutting projecting dowels or plugs
• Double edged 22tpi with teeth set one way
• Single edged 26tpi with no set
• Japanese style tooth pattern
• Flexible blades cut on the pull stroke
• Overall length 290mm(11.1/2") with 120mm(4.3/4") blade
• Made in Canada

• Traditionally used for the rapid trimming of plugs and dowels flush with a surface, these flush cutting saws can be used where you want to cut off a projection without damaging the surrounding or adjoining face.
• The Japanese tooth pattern blade cuts aggressively (on the pull stroke), but does not mark the surface that it is cutting next to.
• The thin blade is flexible and can be pressed flush to any surface, yet is rigid enough for good control.
• The saw is available with teeth cut on only one edge with no set or in a double edged style that cuts from either side with the teeth set in one direction.
• Each is about 290mm long with 120mm of blade. These work like a charm.