Veritas Saw Depth Stop - 05G4510

Veritas Saw Depth Stop - (Ref: 102519 / 05G4510)
 

• The Veritas saw depth stop is an effective and simple way to control the depth of cut when using a tenon saw. It consists of a 230mm (9") long aluminium rail, which has a high friction magnetic strip. This holds the strip onto the saw blade. Attached to the strip are two stainless steel rods that give the rail a 60mm (2-3/8") range of adjustment. The two clamp knobs, with rare-earth magnet bases, register against the spine of the saw. All you need do is simply tighten the brass knobs to lock the rail at the desired cut depth, foolproof.

• Effective way to control the depth of cut
• Simple to set up, fits virtually any tenon saw
• 230mm (9") long aluminium rail with magnetic strip
• 60mm (2-3/8") range of adjustment
• Brass knobs to lock the rail at the desired cut depth