Veto Pro Pac - MB2 Tall Meter / Tool Pouch

Veto Pro Pac - MB2 Tall Meter / Tool Pouch

ref: VPP-MB2

The MB2 tool bag is a taller version of our MB tool bag that holds taller meters, analyzers and repair tools.

Features rugged construction, roomy pockets, interior cushioning, heavy duty zippers, and a detachable rubber handle. The MB2 offers technician's a meter bag or small tool bag. An optional shoulder strap is sold separately.

RUGGED MATERIALS & CONSTRUCTION:

• Durable Leather Trim Panels
• Nylon Plastic Connection Clip
• 600 PVC Impregnated Denier Nylon Body
• 1200 PVC Impregnated Denier Nylon Tool Pockets
• Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers
• D-Rings: Powder Coated Steel
• Vertical Tool Pockets: 8 inside & 2 outside
• Meter Pockets: 2
• D-Rings: 4 small
• Stitching: Industrial Strength Double Nylon Stitching
• Warranty: 5 Years

• Width: 3"
• Length: 8"
• Height: 13"
• Weight (empty): 2 lbs.

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

• Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

• Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

• Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!