Veto Pro Pac - OC140 Tool Case with Panel - V Swap

Veto Pro Pac - OC140 Tool Case with Panel - V Swap

ref: VPP-OC140

Organized and Compact. The OC Cases are an ideal add-on for our larger tool bags or as a stand-alone storage solution. Designed for versatility, each case provides a semi-rigid protective shell for specialized tools & electronics. The medium-sized OC140 includes 1 V-SWAP panel with elastic tension straps, a removable zippered parts bag folio, and an exclusive double-gated carabiner that can connect in multiple locations. 

MAXIMIZED TOOL STORAGE CAPACITY:

• Medium semi-rigid protective clam shell case
• Ruggedized exterior with moisture resistant bottom
• Fully customizable interior
• Several option interior panel configurations sold separately
• Includes 1 removable panel with 2 versatile tension straps, 1 removable zippered folio, and repositionable doubled-gated carabiner for hanging
• Rear molle accepts optional repositionable stainless steel clip for attaching to belt or tool bag

• Exterior Height: : 2.75" (7cm) Interior Height: 2" (5cm)
• Exterior Width: 11.5" (7cm) Interior Width: 10.5" (7cm)
• Exterior Depth: 6.75" (29cm) Interior Depth: 5.5" (26.5cm)
• Weight (empty):  0.8lbs/0.37kg
• Internal Volume: 140in3/2.3L
• Max Payload: 7.5lbs/3.5kg
• Warranty: 5 Years

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

• Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

• Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

• Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!