Veto Pro Pac - Tech OT-SC - Open Top Electrician's Tool Bag

Veto Pro Pac - Tech OT-SC - Open Top Electrician's Tool Bag

ref: VPP-TECHOTSC

Sub-Compact, Open Top Electrician Tool Bag

The TECH OT-SC is a sub-compact open-top “electrician’s tote” style bag. An integral structural box features a repositionable insert box and lid functioning as both storage for small items or as partition. The TECH OT-SC also includes a removable partition divider providing further customization of the rigid storage space (additional insert boxes and partitions sold separately). The bag also features multiple vertical tool pockets for quick and easy access for a variety of service tools.

MAXIMIZED TOOL STORAGE CAPACITY:

• 27 available pockets of varying sizes
• 1 removable plastic partition & insert box with lid
• 8" electrical tape strap
• Exterior utility pocket
• Over moulded ergonomic grip
• Detachable padded shoulder strap
• Waterproof Polypropylene Base for moisture and abrasion protection
• Warranty: 5 Years

• Height (H): 10.25″ (26cm)
• Width (W): 13″ (33cm)
• Depth (D): 10″ (25.5cm)
• Handle Height (HH): 16in/40.5cm
• Weight (empty):  5.5lbs/2.5 kg
• Internal Volume: 500in3/8L
• Max Payload: 25bs/12kg

VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE

Keep the Zippers Clean & Lubricated

• Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.

Protect the Zippers From Sharp Objects and/or Excessive Heat

• Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.

Don’t Overstuff the Bag

• Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!