✔ Competitive Pricing ✔ Quality Service ✔ Extensive Stock ✔ Experienced Staff
For Finding eXcellent Tools ..... look no further than Westcountry Machinery 4 Wood
Veto Pro Pac - XLT - Large Laptop / Tool Bag
Product Code: TO/VPP-XLT
Brand: VETO PRO PAC
Low Stock - Please Call For Availability
£299.00 Inc. VAT
£249.17 Exc. VAT
Veto Pro Pac - XLT - Large Laptop / Tool Bag
ref: VPP-XLT
Key Features
The XLT is a rugged laptop/tool and tech bag designed to organize and store a laptop, business accessories and hand tools in the field. Its rugged construction will protect sensitive computing and testing equipment on the job site and will keep other business essentials and hand tools organized and within easy reach. This is the one bag that does it all! The ultimate tool organization, tool storage solution.
MAXIMIZED TOOL STORAGE CAPACITY:
- Vertical Tool Pockets: 33 inside & 3 outside
- Flat Zippered Pockets: 1 inside & 3 outside
- Neoprene Pockets: 6 Large, 2 Medium, 4 Small
- Horizontal Magnetic Flapped Pockets: 2
- D-Rings: 4 large and 4 small
- Exterior Electrical Tape Loop: 8” Fabric with Clip Closure
- Stainless Steel Tape Clip: Yes
RUGGED MATERIALS & CONSTRUCTION:
- Waterproof Base: 3mm Injection Moulded Polypropylene
- Waterproof Body Fabric: 600 PVC Impregnated Denier Nylon
- Waterproof Tool Pocket Fabric: 600 PVC Impregnated Denier Nylon
- Handle: Injection Moulded Nylon Plastic w/ over-moulded rubber grip
- Zippers: Double Stitched, Heavy Duty Plastic Coil Zippers with Oversized Zipper Tabs
- Fold-Back Snaps: 10 zinc, marine grade
- D-Rings: Powder Coated Steel
- Rivets: 46 zinc, marine grade rivets
- Stitching: Industrial Strength Double Nylon Stitching
OTHER FEATURES:
- Laptop Storage (designed to accommodate most 17" laptops)
- PDA/Phone Storage
- Shoulder Strap: Heavy Duty, Non-Slip Pad, Clip-on Connection
- Warranty: 5 Years (see Veto warranty terms and conditions)
Specification
- Width: 16.5"
- Depth: 9.5”
- Height: 20.25” (14.5" Handle Folded Down)
VETO PRO PAC TOOL BAGS PRODUCT CARE AND MAINTENANCE
Keep the Zippers Clean & Lubricated
- Over time, dirt and grit will “clog” the zipper coils preventing them from staying closed. To keep this from happening, clean and lubricate your zippers twice a year (more often if you work on a job site with a high amount of airborne debris). To clean the coils: Scrub them with soapy water; a tooth brush works very well. After scrubbing the coils, blow them out with an air hose to dislodge any other fine grit that didn’t dislodge with the brush. To lubricate the coils: Apply a silicone spray, beeswax or a zipper lubricant.
Protect the Zippers From Sharp Objects and/or Excessive Heat
- Any sharp object or heat source is capable of permanently damaging the zippers. Once a zipper coil is cut or singed the zipper will not function and in most cases is not repairable. Most of the cut zipper coils we see are the result of sharp tools stored inside the bag with the sharp side facing up. Make sure to keep the sharp edges of your tools facing down in your bag and away from the zipper coils.
Don’t Overstuff the Bag
- Overstuffing your tool bag will very likely cause significant stress on the zippers that is above and beyond what the bag was built for and will eventually cause the zipper(s) to separate. If you have to work hard to close your zipper(s), your tool bag is most likely overstuffed… proceed with caution!