Festool 576243 Module Edge Router MFK 700 EQ/B-Plus 240V

Festool 576243 Module Edge Router MFK 700 EQ/B-Plus 240V

The end of the perfect edge.

• Good view of the workpiece - extraction directly from the table
• Perfect working results with precision fine adjustment
• Large support base ensures safe guidance
• Unique ball bearing brake ensures clean working
• With ball bearing brake and chip deflector

• Module edge router MFK 700 EQ/B 240v
• Ø 8 mm clamping collet
• Open ended spanner WAF 19
• SYSTAINER SYS3 M 187

• Precise fine adjustment: The routing height can be adjusted accurately to a tenth of a millimetre. The lock prevents the router table from moving during operation and is easy to operate.
• Universal interface: By using the integrated interface, different router table modules can be used without the need for tools.
• Moving contact pad: The MFK 700 has an attachable base feeler bearing, ensuring results that are free from marks.
• Surface protection: The bench of the MFK 700 is inclined by 1.5° to protect the surface from damage. The slight inclination of the cutter prevents the surface from being milled off.
• Flush trimming: A 0° bench is also available, e.g. for flush trimming veneered or coated workpiece edges.
• Flush routing and rounding: The design of the router table on the MFK 700 incorporates an opening on the support base to accommodate the veneer overhang. Veneer or strips can be routed flush and rounded at the same time using the correct Festool cutter.
• Side stop with fine setting: The moveable stop jaws of the parallel side fence are installed optimally on the router and thus prevent it from tipping over. This makes perfect rebates and grooves very easy.
• Cutter replacement in seconds: With the MFK 700, cutter replacement is quick and easy. Actuate the spindle stop via the rocker.
• Clean and healthy work: The extractor connector is integrated directly in the router table – for optimum handling and a clear view of the workpiece.
• Flexible motor design: The right motor arrangement for every application: The motor can be installed horizontally or vertically on the router table.
• Speed control adapted to the material: Because of the MMC electronics, the speed of the MFK 700 can be quickly adapted to the working material and is kept constant under load. The temperature monitoring of the motor also guarantees a long service life.
• For quick device changeover: Thanks to the plug-it system, the device can be changed quickly – directly via the cable and not via the socket or extractor: One cable for all devices. And even if the cable breaks, it can be replaced quickly without any problems.

• Edge router specially designed for flush trimming and rounding protruding edges
• Unique ball bearing guide brake ensures perfect, streak-free working results
• Possible to flush trim 0-45° inclined edges (depending on cutter)